Installation on Windows systems

This section applies to Windows 98/Me and Windows NT/2000/XP. PHP will not work on 16 bit platforms such as Windows 3.1 and sometimes we refer to the supported Windows platforms as Win32. Windows 95 is no longer supported as of PHP 4.3.0.

There are two main ways to install PHP for Windows: either manually or by using the InstallShield installer.

If you have Microsoft Visual Studio, you can also build PHP from the original source code.

Once you have PHP installed on your Windows system, you may also want to load various extensions for added functionality.

Windows InstallShield

The Windows PHP installer is available from the downloads page at http://www.php.net/downloads.php. This installs the CGI version of PHP and, for IIS, PWS, and Xitami, configures the web server as well.

Замечание: While the InstallShield installer is an easy way to make PHP work, it is restricted in many aspects, as automatic setup of extensions for example is not supported. The whole set of supported extensions is only available by downloading the zip binary distribution.

Install your selected HTTP server on your system and make sure that it works.

Run the executable installer and follow the instructions provided by the installation wizard. Two types of installation are supported - standard, which provides sensible defaults for all the settings it can, and advanced, which asks questions as it goes along.

The installation wizard gathers enough information to set up the php.ini file and configure the web server to use PHP. For IIS and also PWS on NT Workstation, a list of all the nodes on the server with script map settings is displayed, and you can choose those nodes to which you wish to add the PHP script mappings.

Once the installation has completed the installer will inform you if you need to restart your system, restart the server, or just start using PHP.

Внимание

Be aware, that this setup of PHP is not secure. If you would like to have a secure PHP setup, you'd better go on the manual way, and set every option carefully. This automatically working setup gives you an instantly working PHP installation, but it is not meant to be used on online servers.

Manual Installation Steps

This install guide will help you manually install and configure PHP on your Windows webserver. The original version of this guide was compiled by Bob Silva, and can be found at http://www.umesd.k12.or.us/php/win32install.html. You need to download the zip binary distribution from the downloads page at http://www.php.net/downloads.php.

PHP 4 for Windows comes in three flavours - a CGI executable (php.exe), a CLI executable (sapi/php.exe) and some other SAPI modules:

php4apache.dll - Apache 1.3.x module
php4apache2.dll - Apache 2.0.x module
php4isapi.dll - ISAPI Module for ISAPI compliant webservers like IIS 4.0/PWS 4.0 or newer.
php4nsapi.dll - Netscape/iPlanet module

The latter form is new to PHP 4, and provides significantly improved performance and some new functionality. The CLI version is designed to use PHP for command line scripting. More information about CLI is available in the chapter about using PHP from the command line

Внимание

The SAPI modules have been significantly improved in the 4.1 release, however, you may find that you encounter possible server errors or other server modules such as ASP failing, in older systems.

DCOM and MDAC requirements: If you choose one of the SAPI modules and use Windows 95, be sure to download and install the DCOM update from the Microsoft DCOM pages. If you use Microsoft Windows 9x/NT4 download the latest version of the Microsoft Data Access Components (MDAC) for your platform. MDAC is available at http://msdn.microsoft.com/data/.

The following steps should be performed on all installations before any server specific instructions.

c:\php
   |
   +--cli
   |  |
   |  |-php.exe           -- CLI executable - ONLY for commandline scripting
   |
   |
   +--dlls                -- support dlls for extensions --> Windows system directory
   |  |
   |  |-expat.dll
   |  |
   |  |-fdftk.dll
   |  |
   |  |-...
   |
   +--extensions          -- extension dlls for PHP
   |  |
   |  |-php_bz2.dll
   |  |
   |  |-php_cpdf.dll
   |  |
   |  |-..
   |
   +--mibs                -- support files for SNMP
   |
   |
   +--openssl             -- support files for Openssl
   |
   |
   +--pdf-related         -- support files for PDF
   |
   |
   +--sapi                -- SAPI dlls
   |  |
   |  |-php4apache.dll
   |  |
   |  |-php4apache2.dll
   |  |
   |  |-php4isapi.dll
   |  |
   |  |-..
   |
   |-install.txt
   |
   |-..
   |
   |-php.exe              -- CGI executable
   |
   |-..
   |
   |-php.ini-dist
   |
   |-php.ini-recommended
   | 
   |-php4ts.dll           -- main dll --> Windows system directory
   | 
   |-...

The CGI binary - c:\php\php.exe -, the CLI binary - c:\php\cli\php.exe -, and the SAPI modules - c:\php\sapi\*.dll - rely on the main dll c:\php\php4ts.dll. You have to make sure, that this dll can be found by your PHP installation. The search order for this dll is as follows:

The same directory from where php.exe is called. In case you use a SAPI module the same directory from where your webserver loads the dll (e.g. php4apache.dll).
Any directory in your Windows PATH environment variable.

The following steps are optional.

Following this instructions you are done with the basic steps to setup PHP on Windows. The next step is to choose a webserver and enable it to run PHP. Installation instructions for the following webservers are available:

Building from source

Before getting started, it is worthwhile answering the question: "Why is building on Windows so hard?" Two reasons come to mind:

  1. Windows does not (yet) enjoy a large community of developers who are willing to freely share their source. As a direct result, the necessary investment in infrastructure required to support such development hasn't been made. By and large, what is available has been made possible by the porting of necessary utilities from Unix. Don't be surprised if some of this heritage shows through from time to time.

  2. Pretty much all of the instructions that follow are of the "set and forget" variety. So sit back and try follow the instructions below as faithfully as you can.

Требования

To compile and build PHP you need a Microsoft Development Environment. Microsoft Visual C++ 6.0 is recommended. To extract the downloaded files you need a extraction utility (e.g.: Winzip). If you don't already have an unzip utility, you can get a free version from InfoZip.

Before you get started, you have to download...

Finally, you are going to need the source to PHP 4 itself. You can get the latest development version using anonymous CVS, a snapshot or the most recent released source tarball.

Putting it all together

After downloading the required packages you have to extract them in a proper place.

  • Create a working directory where all files end up after extracting, e.g: C:\work.

  • Create the directory win32build under your working directory (C:\work) and unzip win32build.zip into it.

  • Create the directory bindlib_w32 under your working directory (C:\work) and unzip bindlib_w32.zip into it.

  • Extract the downloaded PHP source code into your working directory (C:\work).

Following this steps your directory structure looks like this:

+--c:\work
|  |
|  +--bindlib_w32
|  |  |
|  |  +--arpa
|  |  |
|  |  +--conf
|  |  |
|  |  +--...
|  |
|  +--php-4.x.x
|  |  |
|  |  +--build
|  |  |
|  |  +--...
|  |  |
|  |  +--win32
|  |  |
|  |  +--...
|  |
|  +--win32build
|  |  |
|  |  +--bin
|  |  |
|  |  +--include
|  |  |
|  |  +--lib

Create the directories c:\usr\local\lib. Copy bison.simple from c:\work\win32build\bin to c:\usr\local\lib.

Замечание: Cygwin users may omit the last step. A properly installed Cygwin environment provides the mandatory files bison.simple and bison.exe.

Configure MVC ++

The next step is to configure MVC ++ to prepare for compiling. Launch Microsoft Visual C++, and from the menu select Tools => Options. In the dialog, select the directories tab. Sequentially change the dropdown to Executables, Includes, and Library files. Your entries should look like this:

  • Executable files: c:\work\win32build\bin, Cygwin users: cygwin\bin

  • Include files: c:\work\win32build\include

  • Library files: c:\work\win32build\lib

Build resolv.lib

You must build the resolv.lib library. Decide whether you want to have debug symbols available (bindlib - Win32 Debug) or not (bindlib - Win32 Release). Build the appropriate configuration:

  • For GUI users, launch VC++, and then select File => Open Workspace, navigate to c:\work\bindlib_w32 and select bindlib.dsw. Then select Build=>Set Active Configuration and select the desired configuration. Finally select Build=>Rebuild All.

  • For command line users, make sure that you either have the C++ environment variables registered, or have run vcvars.bat, and then execute one of the following commands:

    • msdev bindlib.dsp /MAKE "bindlib - Win32 Debug"

    • msdev bindlib.dsp /MAKE "bindlib - Win32 Release"

At this point, you should have a usable resolv.lib in either your c:\work\bindlib_w32\Debug or Release subdirectories. Copy this file into your c:\work\win32build\lib directory over the file by the same name found in there.

Compiling

The best way to get started is to build the CGI version.

  • For GUI users, launch VC++, and then select File => Open Workspace and select c:\work\php-4.x.x\win32\php4ts.dsw . Then select Build=>Set Active Configuration and select the desired configuration, either php4ts - Win32 Debug_TS or php4ts - Win32 Release_TS. Finally select Build=>Rebuild All.

  • For command line users, make sure that you either have the C++ environment variables registered, or have run vcvars.bat, and then execute one of the following commands from the c:\work\php-4.x.x\win32 directory:

    • msdev php4ts.dsp /MAKE "php4ts - Win32 Debug_TS"

    • msdev php4ts.dsp /MAKE "php4ts - Win32 Release_TS"

    • At this point, you should have a usable php.exe in either your c:\work\php-4.x.x.\Debug_TS or Release_TS subdirectories.

It is possible to do minor customization to the build process by editing the main/config.win32.h file. For example you can change the default location of php.ini, the built-in extensions, and the default location for your extensions.

Next you may want to build the CLI version which is designed to use PHP from the command line. The steps are the same as for building the CGI version, except you have to select the php4ts_cli - Win32 Debug_TS or php4ts_cli - Win32 Release_TS project file. After a successful compiling run you will find the php.exe in either the directory Release_TS\cli\ or Debug_TS\cli\.

Замечание: If you want to use PEAR and the comfortable command line installer, the CLI-SAPI is mandatory. For more information about PEAR and the installer read the documentation at the PEAR website.

In order to build the SAPI module (php4isapi.dll) for integrating PHP with Microsoft IIS, set your active configuration to php4isapi-whatever-config and build the desired dll.

Installation of Windows extensions

After installing PHP and a webserver on Windows, you will probably want to install some extensions for added functionality. You can choose which extensions you would like to load when PHP starts by modifying your php.ini. You can also load a module dynamically in your script using dl().

The DLLs for PHP extensions are prefixed with 'php_' in PHP 4 (and 'php3_' in PHP 3). This prevents confusion between PHP extensions and their supporting libraries.

Замечание: In PHP 4.3.1 BCMath, Calendar, COM, Ctype, FTP, MySQL, ODBC, Overload, PCRE, Session, Tokenizer, WDDX, XML and Zlib support is built in. You don't need to load any additional extensions in order to use these functions. See your distributions README.txt or install.txt or this table for a list of built in modules.

The default location PHP searches for extensions is c:\php4\extensions. To change this setting to reflect your setup of PHP edit your php.ini file:

Замечание: If you are running a server module version of PHP remember to restart your webserver to reflect your changes to php.ini.

The following table describes some of the extensions available and required additional dlls.

Таблица 3-1. PHP Extensions

ExtensionDescriptionNotes
php_bz2.dllbzip2 compression functionsNone
php_calendar.dllCalendar conversion functionsBuilt in since PHP 4.0.3
php_cpdf.dllClibPDF functionsNone
php_crack.dllCrack functionsNone
php3_crypt.dllCrypt functionsunknown
php_ctype.dllctype family functionsBuilt in since PHP 4.3.0
php_curl.dllCURL, Client URL library functionsRequires: libeay32.dll, ssleay32.dll (bundled)
php_cybercash.dllCybercash payment functionsPHP <= 4.2.0
php_db.dllDBM functionsDeprecated. Use DBA instead (php_dba.dll)
php_dba.dllDBA: DataBase (dbm-style) Abstraction layer functionsNone
php_dbase.dlldBase functionsNone
php3_dbm.dllBerkeley DB2 libraryunknown
php_dbx.dlldbx functions 
php_domxml.dllDOM XML functions PHP <= 4.2.0 requires: libxml2.dll (bundled) PHP >= 4.3.0 requires: iconv.dll (bundled)
php_dotnet.dll.NET functionsPHP <= 4.1.1
php_exif.dllRead EXIF headers from JPEGNone
php_fbsql.dllFrontBase functionsPHP <= 4.2.0
php_fdf.dllFDF: Forms Data Format functions.Requires: fdftk.dll (bundled)
php_filepro.dllfilePro functionsRead-only access
php_ftp.dllFTP functionsBuilt-in since PHP 4.0.3
php_gd.dllGD library image functions Removed in PHP 4.3.2. Also note that truecolor functions are not available in GD1, instead, use php_gd2.dll.
php_gd2.dllGD library image functionsGD2
php_gettext.dllGettext functions PHP <= 4.2.0 requires gnu_gettext.dll (bundled), PHP >= 4.2.3 requires libintl-1.dll, iconv.dll (bundled).
php_hyperwave.dllHyperWave functionsNone
php_iconv.dllICONV characterset conversionRequires: iconv-1.3.dll (bundled), PHP >=4.2.1 iconv.dll
php_ifx.dllInformix functionsRequires: Informix libraries
php_iisfunc.dllIIS management functionsNone
php_imap.dllIMAP POP3 and NNTP functionsPHP 3: php3_imap4r1.dll
php_ingres.dllIngres II functionsRequires: Ingres II libraries
php_interbase.dllInterBase functionsRequires: gds32.dll (bundled)
php_java.dllJava functionsPHP <= 4.0.6 requires: jvm.dll (bundled)
php_ldap.dllLDAP functions PHP <= 4.2.0 requires libsasl.dll (bundled), PHP >= 4.3.0 requires libeay32.dll, ssleay32.dll (bundled)
php_mbstring.dllMulti-Byte String functionsNone
php_mcrypt.dllMcrypt Encryption functionsRequires: libmcrypt.dll
php_mhash.dllMhash functionsPHP >= 4.3.0 requires: libmhash.dll (bundled)
php_mime_magic.dllMimetype functionsRequires: magic.mime (bundled)
php_ming.dllMing functions for FlashNone
php_msql.dllmSQL functionsRequires: msql.dll (bundled)
php3_msql1.dllmSQL 1 clientunknown
php3_msql2.dllmSQL 2 clientunknown
php_mssql.dllMSSQL functionsRequires: ntwdblib.dll (bundled)
php3_mysql.dllMySQL functionsBuilt-in in PHP 4
php3_nsmail.dllNetscape mail functionsunknown
php3_oci73.dllOracle functionsunknown
php_oci8.dllOracle 8 functionsRequires: Oracle 8.1+ client libraries
php_openssl.dllOpenSSL functionsRequires: libeay32.dll (bundled)
php_oracle.dllOracle functionsRequires: Oracle 7 client libraries
php_overload.dllObject overloading functionsBuilt in since PHP 4.3.0
php_pdf.dllPDF functionsNone
php_pgsql.dllPostgreSQL functionsNone
php_printer.dllPrinter functionsNone
php_shmop.dllShared Memory functionsNone
php_snmp.dllSNMP get and walk functionsNT only!
php_sockets.dllSocket functionsNone
php_sybase_ct.dllSybase functionsRequires: Sybase client libraries
php_tokenizer.dllTokenizer functionsBuilt in since PHP 4.3.0
php_w32api.dllW32api functionsNone
php_xmlrpc.dllXML-RPC functionsPHP >= 4.2.1 requires: iconv.dll (bundled)
php_xslt.dllXSLT functions PHP <= 4.2.0 requires sablot.dll, expat.dll (bundled). PHP >= 4.2.1 requires sablot.dll, expat.dll, iconv.dll (bundled).
php_yaz.dllYAZ functionsRequires: yaz.dll (bundled)
php_zip.dllZip File functionsRead only access
php_zlib.dllZLib compression functionsBuilt in since PHP 4.3.0


HIVE: All information for read only. Please respect copyright!
Hosted by hive КГБ: Киевская городская библиотека